Home

SMTP server authentication error Epson

Email Server Connection Report Message

  1. There is an SMTP mismatch between a server and a client, or the server requests an SSL/TLS connection for SMTP Connection to SMTP server failed. Change Secure Connection to STARTTLS
  2. I need the SMTP setting for a gmail account to set up to scan to e-mail on an Epson WF-7720 printer 0 Trying to scan to e-mail on my Epson WF-7720 printer but I'm getting an Authentication Error I need the right setting for a Gmail account, Port # etc..
  3. POP3 server authentication failed: Unsupported communication method. Check the following - SMTP Server Address - SMTP Server Port Number: The communication protocol is unsupported: Connection to SMTP server failed. Change Secure Connection to None. There is an SMTP mismatch between a server and a client, or when the server does not support an.

Used with the POP Before SMTP and SMTP-AUTH methods. Lets you enter a password for the authenticated account. Used with the POP Before SMTP and SMTP-AUTH methods. Lets you enter the email address to be displayed to the sender. Lets you enter the port number of the SMTP server. The default port is 25. Lets you enter the port number of the POP3. Select one of the options shown above, then select the settings you want to use. Contact your internet service provider if necessary to confirm the authentication method for the email server. Select OK to save and select Done to exit. Select Connection Check to verify the connection to the email server On your printer, go to where you enter Email server settings. For me it was (translated from Norwegian): Preferences → General preferences → Scanner preferences → E-mail server → Server preferences. Choose the option saying something like SMTP-Verified, not POP before SMTP

SMTP Error (535): Authentication failed error is usually related to the bad user email settings in Microsoft Outlook. That's why, Email client configuration always need special attention. Now, let's see the reasons behind this error and how our Support Engineers correct it for customers Small things but will cause scan to fail: 1) DNS Server must be set correctly on the printer IP Settings to resolve smtp.office365.com. 2) The ports for that printer IP need to be allowed out in the firewall. 3) The printer needs to be set to TLS authentication and SMTP requires authentication. 4) Create a user in Office 365 cloud with a.

Verify your account to enable IT peers to see that you are a professional. My guess is that the scanner is attempting to send email from a specific address. The account you are using to authenticate to the SMTP server does not have permission to send as the email address you specified as the sender The first option is to enable 'Less secure apps' within GMAIL. Log into your GMAIL account. Navigate to the ' Less secure apps ' page. Toggle to turn this feature 'ON'. Wait at least 1 hour for Google to update this setting. Test your mail application again. It should now send correctly via SMTP SMTP Server Address: smtp.live.com / smtp-mail.outlook.com. SMTP Server Port: 25/587. POP3 Server Address: pop3.live.com / pop3-mail.outlook.com. POP3 Server Port: 995 / 25. I've being tried to use those info for printer, but unfortunately it shows unsupported method or check pop3 server. Could anyone please give me some idea to setup this on

Setting the IP address of the DNS server manually did not help (neither to the local DNS nor the Google's DNS). What worked, was entering the IP address of the SMTP server manually (which, of course, defeats the purpose of having domain names in the first place). Of course, the SMTP port has to be enabled in the firewall 4 Database server You can use an existing SQL server. You can also build a new system in the Epson Print Admin server. 5 SMTP server For sending email notifications. 6 Computer for administrator A computer for managing Epson Print Admin. This allows you to access the Web page for the Epson Print Admin server. It is also used as a single user. Consult the network administrator about the file server and the authentication server settings. Do one of the following: If the SNTP server is NOT being used and the error message still continues, consult the network administrator for the further support. If there is the SNTP server, go to STEP 6 The new printer will give a certificate error. Ignore this message it's for certificates to setup secure data transfer. Navigate to Wi-Fi/Network Settings > Email Server - Basic and enter the settings required, i.e. WF-7610 has been used for this example. The WP range will be slightly different

I need the SMTP setting for a gmail account to set up to

Mail Server Settings: 1. Create a new user account and password for the MFP on the mail server. This user account name, the Name set in the MFP's Top Page, and the Device Name in Network Settings should all be the same. Use this account and password for SMTP Authentication. 2. Test the MFP with another email server Verify that the Authenticated SMTP setting is checked (enabled). Select Save changes. Disable Multi-Factor Authentication (MFA) on the licensed mailbox being used: In the Microsoft 365 admin center, in the left navigation menu, choose Users > Active users. On the Active users page, choose Multi-Factor Authentication Click Destination Settings and select Account Settings in the E-mail Settings window. Set up your email account by entering your email address and selecting your Sending Method and Authentication settings You will either have to sign into the server with your Gmail account or find out from your domain host what SMTP server to use. Our automated system analyzes replies to choose the one that's most likely to answer the question. If it seems to be helpful, we may eventually mark it as a Recommended Answer

You are providing your consent to Epson America, Inc., doing business as Epson, so that we may send you promotional emails. You may withdraw your consent or view our privacy policy at any time. To contact Epson America, you may write to 3131 Katella Ave, Los Alamitos, CA 90720 or call 1-800-463-7766 Hi, wcollins! So that the Community can help you better, we will need to know exactly which Canon printer model you're using. That, and any other details you'd like to give will help the Community better understand your issue Server Error: Epson Connect Email Print is currently unavailable. The printer printed the same file again. When an internet connection between the Epson Connect server and your printer is unstable, the server may fail to confirm the completion of printing. In that case, the print job may be reprinted..

Set up the app or device with the restricted Gmail SMTP server. On your device or app, connect to the restricted SMTP server: Enter aspmx.l.google.com as the server address. Enter 25 in the Port field. Identify the IP address of the device or app. In the Admin console, add the IP address of the device or app to the allowlist Outgoing Mail (SMTP) Server - Requires TLS or SSL smtp.gmail.com Port: 465 or 587 Requires SSL: Yes Requires authentication: Yes Use same settings as incoming mail server NB If your client does not support SMTP authentication, you won't be able to send mail through your client using your Gmail address As far as Outgoing scanning to email (SMTP) is concerned, Port 587 or 465 with SSL seems to work in many cases. Be sure to enter appropriate Authentication credentials (valid username/password). If you are still having trouble with this, please contact Comcast to determine which set of settings will work with your imager for Outgoing SMTP Note: If you have not configured an email server, you are prompted to setup the server. Select Proceed to open the server settings screen or select Done to continue. You see a screen like this: Do one of the following: Select Contacts and choose an email address from the Contacts list

Email Server Settings - files

  1. Re: Bigpond and Epson WF-3640 Scan to Email. In response to Caaf. Thank you but seems this might not be the issue as I get the same Cannot communicate with POP server, Check settings for any Bigpond settings I try. Also tried iCloud or Outlook.com (with POP enabled) but no improvement. Looking at the Epson sw, seems no IPv4 (allocated by.
  2. DNS is configured properly. Tried the IP address of the SMTP server, no luck. Tried Port 465 with SSL. No Joy. Immediately switched over to GMAIL and after turning on Less Secure Apps, worked on the first try. Another client had their ISP email account. Set up the SMTP settings for that and it worked. Tried O365 again, and it would fail
  3. 220 - The SMTP server is ready; 221 - The SMTP server is closing its transmission channel; 250 - The requested action taken and completed (Good news!) SMTP 300 Response Codes. A code starting with 3 indicates the request is understood, but the server is going to need more information to complete the task. 334 - Provide SMTP.

Configuring Email Server Settings - files

  1. configuring my printer/scanner to email server. I cannot figure out how to scan to my email on my Epson WF3720. I know how to get into settings on my printer , but have no idea what authentication to use- Pop before SMTP or SMTP-Auth. Don't know what that means. What SMTP server address do I use
  2. istering a Microsoft IIS SMTP server, you must enable Basic Authentication by going here: IIS Manager > local computer > Default SMTP Virtual Server > Properties > Access tab > Authentication > Basic Authentication > (checked) Gmail is now requiring OAuth authentication. Your app should show an option for this
  3. SMTP Response codes and troubleshooting tips. Response codes. Each SMTP call you make returns a response. 200 responses are usually success responses, and 400 responses are usually deferrals. SendGrid continues to retry resending 400 messages for up to 72 hours.500 responses are hard failures that are not retried by our servers. This table has possible response codes with example errors and a.

Ensure that the server port for outgoing mail is 587 Click Apply and OK Remove any unsent messages from the outbox (below the account folders in the folder pane), then close down Windows Live Mail and wait a few minutes while the program does its housekeeping and stores the new security settings SMTP Server Address Enter the SMTP server address from 1 to 255 characters long using A-Z, a-z, 0-9, and - in IPv4 or FQDN format SMTP Server Port Number Enter the SMTP server port number between 1 and 65535 Secure Connection Select the security method for the email server; available choices depend on the Authentication Method settin From the SMTP Server Authentication menu, select Login / Plain. From the Device-Initiated E-mail menu, select Use Device SMTP Credentials. In the Device Userid field, type your e-mail address. For example, user@gmail.com. In the Device Password field, depending on your e-mail provider, type either your e-mail account password or app password

Method 2: Using SendGrid as the SMTP Server. Sign up to SendGrid here. There is a free option if you're not sending a lot of emails. Once SendGrid is setup, you simply need to configure the printer with the server, username and password highlighted below Don't configure Thunderbird to save a copy of any messages you send in tools -> account settings -> copies & folders. Gmail's SMTP server automatically saves a copy of any message you send in the Sent Items folder for you. The SMTP server also supports using port 465 with SSL/TLS Having a problem configuring/setup email server for gmail account. Technician's Assistant: How do you usually access Gmail? On a phone or tablet, or through a web browser? Web browser. I trying to use my email on my epson wf-7720 printer. Technician's Assistant: What troubleshooting have you tried? Tried connecting via smtp. using; smtp.gmail. This video will show you how to set up your email software to download and send emails in your Gmail accoun

The previously set server will have a check mark (√) before the server name. Any servers that can't be connected to will also display (Offline) after the server name. When the SMTP server information pane appears, ensure the Account Information tab is selected. On this page ensure the Server name is correct Jan 16, 2021. @Jenweil I've been using Thunderbird with Spectrum (previously Time Warner) for years now and it works perfectly. For reference, see my Thunderbird (version78.6.0) configuration below. Hope this helps. IMAP Mail Server. ServerName: mail.twc.com. Port: 993. Security Settings. Connection security: SSL/TLS change the SMTP TX port to 587, find it at System Settings-> Network Settings-> TCP/IP Settings-> Port Number Settings; Enter the info in E-Mails Settings System Settings-> Network Settings-> E-Mail Setting; SMTP Server Addess: smtp.comcast.net. E-Mail Address: your@address. Check Use SMTP Auth. Enter your username: your@comcast.net. Check Set. SMTP Authentication details Here, We need to use the mail host as smtp.gmail.com , which is gmail default service provided by Google . Then we need to configure the ports as 587 for TLS security or 465 for SSL security or also we can use port 25 Windows Live Hotmail SMTP Server Settings. These are the outgoing SMTP server settings for sending mail using Windows Live Hotmail from any email program, mobile device, or another email service: Hotmail SMTP Server : smtp-mail.outlook.com. Hotmail SMTP Port : 587. Hotmail Security : STARTTLS

[SOLVED] - Epson WorkForce, setting up Scan to email

If you already have an SMTP server configured internally, using SMTP relay may suit you better. This post will cover the SMTP Client Submission method. The disadvantage of this method is that it requires the printer to use a licensed Office 365 account. But it is very easy to setup Require SMTP Authentication: No (Requires TLS, which these devices can't use) Require TLS Encryption: No. No emails come through. I can see the traffic on the firewall using port 25 from the LAN IP of the device. Doesn't seem like it's getting blocked. I see outbound traffic to a Google IP address (172.217.197.28) A result of this migration is a change in behavior regarding the handling of SMTP user name and password in situations where the mail server didn't support authentication. Previously, if a SMTP user name was provided but the server didn't support authentication, the .NET SMTP mail client would ignore the provided user name and password and. SMTP Authentication is the mechanism by which the clients of an ISP identify themselves to the mail server through which they intend to send email. It is not possible for any person to send email via any mail server they choose; mail servers will only allow the sending of email by legitimate users. How it works: Upon sending an email, the user.

Then open the folder Epson Software. Then open the app called Epson Scan 2 app and scan with it. - If there is problem with the Epson Scan 2 app, please open Finder > Applications > Epson Software, then there, open the app called Epson Scan 2 Utility. There, make sure the correct printer is selected. If necessary, select the Other tab and click. (Ex: smtp.example.net or 192.0.0.1) If you are using the DNS name of the SMTP E-mail server, you must use the FQDN (Full Qualified Domain Name) such as smtp.example.net ; SMTP Port: Specify the destination port number of the SMTP server that you will connect to. SMTP Server Authentication Method: Specify the authentication method for the SMTP. I replaced all the IP addresses for the new SMTP server (set up on the new Exchange server). However, none of the 5225s will Scan to Email any more. The 7428 and the 5745 still Scan to Email properly, by only changing the IP address of the new server. We have tried numerous configurations. The SMTP server does not require authentication Type the appropriately formatted address or host name of your server and change the default port number as needed. Under Device Email Address, type the email address of the printer. If the SMTP server requires authentication, for SMTP Authentication, complete the following steps. For Server Requires SMTP Authentication, select the check box SMTP Server Settings for Yahoo Mail . The SMTP server settings apply to outgoing mail, so they're the same whether you use POP or IMAP for incoming email. In most cases, enter the SMTP settings in the Settings section of your email client when you add the Yahoo account to it

SMTP Error (535): Authentication failed - How we Fixed i

Opening a test SMTP client on my computer and emailing to the server IP on port 25 with no credentials works fine. Server takes the message and redirects it to comcast on port 587 and email in the inbox. With the Canon, server IP is entered for SMTP server address. Another area of the system has port 25 setup for SMTP port You could also use an open DNS server not attributed to an ISP, DNS was the primary issue here from what the fault was, not SMTP. The fact you could not use SMTP.gmail.com but could use it's IP address also indicates the issue was the DNS settings from the beginning.. Quickest resolution almost certainly would have been to use your gateway address as a DNS server (192.168.1.1) and also Google. SMTP authentication or simply SMTP AUTH is the service extension of the ESMTP. It requires that an email sender (client) must have permission to use the email server. So, only authorized users can send outgoing messages. Authentication is carried out according to the SASL mechanism When sending e-mail to an SMTP server, you can enhance the SMTP server security level by connecting to the POP server for authentication. If you set POP before SMTP to [On], specify the waiting time after authentication, user name, e-mail address, and password. To enable POP server authentication before sending e-mail via the SMTP server, set.

Scan to email - Failed SMTP authentication with Office365

  1. Step 6: Enter the gmail/google apps information as follows: SMTP Server Address: smtp.gmail.com SMTP Port: 465 SMTP Server Authentication Method: SMTP-AUTH SMTP-AUTH Account Name: <your full gmail/google apps email address> SMTP-AUTH Account Password: <your password of course> SMTP over SSL/TLS: SSL Device E-mail Address: <this is the email account I created specifically for this printer, but.
  2. Scroll down on the Network Settings page and find the SMTP settings. Your SMTP server should be smtp.office365.com. The fix is to add <brackets> to your sender address ( 2016-current) or your reply-to ( pre-2016 ) then click Submit. Do NOT put brackets around the email address in the authentication portion of the SMTP settings
  3. Are you having a problem sending email or looking for a reliable SMTP server? AuthSMTP is the outgoing SMTP email service for your e-commerce website, mailing list or email program.. It works on most current computers or devices and solves many of the common problems with sending email such as relaying denied errors or blacklisting issues.. With instant setup, a money back guarantee and very.
  4. The Richoh scaners have a bug with Authenticated SMTP. The newer scanners have a firmware update that fixes this the older ones do not. Most Richoh scanner installers tell users to create a gmail account then they setup the scanner to use auth-smtp to relay through that. If you try doing this and it fails then your scanner has the bug

Use an on-premises Exchange server (or another SMTP email server) if your device is unable to meet the previous requirements for connecting to Microsoft 365 or Office 365. In fact, you might find it easier to manage multiple devices and applications that send email messages in an on-premises Exchange server instead of connecting them all to. Is the customer using Exchange 2010 local or hosted? Sounds like a connector problem on Exchange. I've seen this on Xerox and Lexmark also. Though this is for SBS servers it can give some guidance

[SOLVED] SMTP Authentication Failed - Cannon Image Runner

  1. All IP addresses are written in segments of four numerical values (for IPv4). In the final segment, set a unique numerical value within a range of 1 to 254. (When the router is a DHCP server or when there is another DHCP server in the home network, set a value that does not conflict with the IP address allocated by the DHCP server.) Setting.
  2. Fix: Enable POP in Gmail as follows: Sign in to Gmail. Click the gear icon in the upper right, then select Settings . Click Forwarding and POP/IMAP . Select Enable POP for all mail or Enable POP for mail that arrives from now on . Choose what to do with your messages after your POP client or device receives them. Click Save Changes
  3. You can change the printer email address registered to the Epson Connect service. The server provides a unique email address for the printer. You can use the following procedure to change the printer's email address. Click Printer Email Address from the printer menu on the left of the screen. Enter the new email address in New Printer Email.
  4. From there, tick on the box that says, My server requires authentication. Once that is done, click on the OK button. Now you may likely not face the same issue again. 4. Check SMTP Settings. To ensure that the SMTP settings have not been altered with, check the Domain name Server connectivity, using the following command

When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to The static IP can be your actual WAN static IP. It just needs to be coming from that address you specify when you create the connectors in Office 365 (this provides the authentication piece). The other catch is the scanner needs to use an email address that is licensed in Office 365 8. Click on the Delete button and all the data information about your Epson printer 4750 will be completely removed from your system. 9. After you have deleted the printer driver, restart the system and proceed to the Epson support page to download and install the latest drivers for your printer Any internal device (MFP, alerts, monitoring software) is a PITA to setup with O365. I also like all those services to use a different sned-as address. i just setup a SMTP relay in IIS. I point all my internal sending devices to that as the SMTP server

The mail server will respond with 235 Authentication successful. Getting this far indicates that your connection to smtp.sendgrid.net over the chosen port is open and that your API key is valid. Next, add the email that you're sending from using the SMTP MAIL FROM command and press Enter Used smtp.office365.com as the outgoing server and My outgoing server requires authentication is also checked. When I configure it through outlook using IMAP protocol it says: Send test e-mail message: None of the authentication methods supported by this client are supported by your server

Troubleshooting GMAIL SMTP authentication errors

Uses the information for SMTP server authentication set in the machine. (See Common Communication Settings for E-Mail/I-Fax.) Further settings are not required for every user. [Regist. Info. for Each User]: Uses the authentication information registered by each user of an SMTP server. Further settings are required for each user Enter the printer's email address and send an email. You can check the printer's email address using one of the following methods. On the information sheet printed when you completed the setup for Epson Connect. On the Printer List on the User Page. On the printer LCD panel

To reiterate, the particular combination of SMTP username and password that works on the Samsung and Epson MFP's does not (always) work on the HP MFP. So, apparently, whoever wrote the code here implemented some sort of rules for the SMTP password and those rules and requiremnts are not included in any of the support documentation for this MFP Flag Post. Hi, Try setting as following and check fi that may work: SMTP Server: smtp.mail.yahoo.co.uk. SMTP Port: 465. Check the box next to Always use secure connection (SSL/TLS) Check the box next to SMTP server requires authentication for outgoing e-mail messages. SMTP User ID: your full Email address SMTP Server - Local hostname of your email server. Authentication - Type of authentication enabled on your email server, if unknown leave set to Auto Detect User - Service account username used to to your email server. Password - Service account password used to to your email server To set up an IMAP mail message server, follow these instructions: First, open Gmail and click on Settings in the top right. Then click on Settings and go to the Forwarding and POP/IMAP tab. In the IMAP Access section, click on Enable IMAP and then Save Changes. Incoming Mail Server (IMAP): imap.gmail.com

godaddy.com SMTP settings. 7 Years Ago Rob Bussell E-Mail. September 27, 2011 September 04, 2012. September 26, 2014. Submitted by Matt Carlson Old Settings. SMTP server: mail.ex1.secureserver.net mail.ex2.secureserver.net mail.ex3.secureserver.net Use SSL so ports 465 and 587 Use Authentication Launch the Internet Information Services (IIS) 6.0 Manager. Right-click on 'SMTP Virtual Server #1' and select 'Properties'. Tap the General tab and change the IP Address to the server's IP address. Then tap the 'Access' tab and click on the 'Connection' button. In the Connection window, select 'Only the list below' and. Configure SMTP Authentication Settings: Click on Edit in the Action column next to SMTP. Click on the SMTP Authentication tab. In the User Jobs section, click on the System radio button for the SMTP Login credentials applied to email jobs sent from the machine's touch interface. Enter the Gmail email address in the Login Name field SMTP Email no longer working (2) Also having issues with outgoing SMTP server. Cannot connect to the following server: $ telnet smtp.w14c.comcast.net 587. Trying 68.87.20.12... Connected to smtp.w14c.comcast.net. Escape character is '^]'. 554 comomta-ch2-01v.sys.comcast.net bizsmtp ESMTP server not available. Connection closed by foreign host Confirm or update your incoming email server info: Incoming email server - imap.mail.att.net Port - 993 Server requires SSL is selected; Confirm or update your Outgoing email server info: Outgoing email server - smtp.mail.att.net; Port - 465 Server requires SSL is selected; Outgoing server requires authentication is selecte

Server configuration issue with setup SCAN TO EMAIL with

If the authentication method of SMTP server is POP3 before SMTP, put a check mark of SMTP Requires POP Before SMTP Authentication. Enter the IP address and port number. Scanning and sending an emai Please someone help I just got a new Officejet Pro 8720 and set up a new email address that is specifically for my printer/scanner so I can print and scan directly to the machine through the email address ending in _____ @hpeprint.com. When I try to use this HP email address as my outgoing email to be used when scanning to email, the system is asking me for the SMTP server and port. Use an on-premises Exchange server (or another SMTP email server) if your device is unable to meet the previous requirements for connecting to Microsoft 365 or Office 365. In fact, you might find it easier to manage multiple devices and applications that send email messages in an on-premises Exchange server instead of connecting them all to. 1. Choose an SMTP Server. The first step is to choose how you want to set up your SMTP outgoing mail server with GMass. There are three ways you can do this: A. Use the GMass SMTP server. You can use GMass' own SMTP mail account on SendGrid if you fulfill either of these two conditions: Your emails are non-commercial in nature

CVE-2012-3137: The authentication protocol in Oracle Database Server 10.2.0.3, 10.2.0.4, 10.2.0.5, 11.1.0.7, 11.2.0.2, and 11.2.0.3 allows remote attackers to obtain the session key and salt for arbitrary users, which leaks information about the cryptographic hash and makes it easier to conduct brute force password guessing attacks, aka. I do not have an SMTP server of my own so I am attempting to configure the device to scan to email using Gmail's free SMTP server. I have entered the server as smtp.gmail.com, the port as both 465 and 587 and have tried to configure both with and without the SSL protocol box enabled Comcast SMTP server problem. We have been using smtp.w14c.comcast.net for outgoing messages for many months without any problem. Starting today, sending emails fails with the following error: We are not sure if this is a problem with the server or the email software (it was automatically updated recently). Our email software: Thunderbird 38.0.1 Click on [SMTP Server]. Ensure Auto Discover SMTP Server is Not checked off. Select the [Host Name] radio button next to Name or IP Address. Type: smtp.office365.com in the SMTP Server Host Name and Port field. Type: 587 in the Port Number for sending E-mail field. Place a check mark in the [Server Requires SMTP Authentication] check box

Solved: Cannot resolve SMTP for Scan to E-mail feature

AOL Mail (stylized as Aol Mail) is a free web-based email service provided by AOL, a division of Verizon Communications. The service is sometimes referred to as AIM Mail where AIM stands for AOL Instant Messenger If you do not know the SMTP server name, SMTP port number, or authentication information, contact the email/Internet service provider or system administrator for the information. SMTP server names and port names are typically easy to find by doing an Internet search

Sets the IP address or host name for the SMTP server. You can enter up to 64 characters. Set Sender's Address (From) Sets an e-mail address for this machine. Receive Setting. Sets the protocol to be used for receiving e- mails. Authentication Method. Sets the authentication method. SMTP User ID. Sets the ID to the server used for SMTP. Incoming mail server (IMAP): imap.aol.com. Outgoing mail server (SMTP): smtp.aol.com. IMAP-993-SSL. SMTP-465-SSL. Instructions for common email apps. Settings may be in a different location in each email client, though the AOL server and port settings will always be the same Configure and use Scan to E-mail Server. In the Web Management, click the Scan tab. (Refer to: Configure POP3/IMAP4/SMTP Server Settings for steps on how to open Web Management.) 2. Click on Scan to E-mail Server. 3. Configure the following settings: - File Name: Select a file name prefix from the preset DA: 20 PA: 50 MOZ Rank: 9 Print Speed: Up to 34 ppm †. Take advantage of low power consumption, a low Total Cost of Ownership (TCO), a fast First Page Out Time (FPOT) and features designed for easy business integration with the new WorkForce Pro WF-M5298. This business inkjet printer benefits from automatic double-sided printing, making any job easy and efficient, and. If you use Office365 SMTP server i.e. smtp.office365.com on telnet it does not work because authentication is mandatory and for some reason I was not able to make authentication work in Telnet After lots of research and brainstorming I was able to get awesome reliable tool i.e. PowerShell (which is installed on most of the windows machine)

I keep getting the error message Authenticate Err